###########################################################################
#                    Honeywall Initial Setup Information                  #    
#                                  by                                     #
#             The Honeynet Project and the Research Alliance              #
###########################################################################

                      Last Modified: 18 Augustt, 2005


PURPOSE
=======
To document the required information you will need to complete the initial
setup of a new Honeywall CDROM installation.


1. GATEWAY
==========
1.1  IP addresses of honeypots
1.2  Network and Broadcast of honeypots

2. MANAGEMENT
=============
2.1  IP address of management interface
2.2  Network and broadcast of management interface
2.3  DNS server of management interface
2.4  Allowed Inbound TCP connections to mgmt interface
2.5  SRC IP addresses/network to mgmt interface
2.6  Allowed Outbound TCP ports
2.7  Allowed Outbound UDP Ports

3. INBOUND
==========
3.1  Whitelist filename and IP's/networks
3.2  Blacklist filename and IP's/networks

4. OUTBOUND
===========
4.1  Interval for counting connections (seconds, minutes, hours, days)
4.2  Number of connections for protocls (TCP, ICMP, UDP, OTHER)
4.3 Fencelist filename and IP's/networks

5. SEBEK
========
5.1  Sebek packets out bound (Allow,Drop,Log)
5.2  IP address of destination for Sebek packets
5.3  Port destination of Sebek packets

6. MISC
=======
6.1  Enable alerting 
6.2  Email address for alerts
6.3  System Hostname