host #vmware-config.pl
Making sure VMware GSX Server's services are stopped.

Stopping VMware services:
   Virtual machine monitor                                 [  OK  ]
   Bridged networking on /dev/vmnet0                       [  OK  ]
   DHCP server on /dev/vmnet1                              [  OK  ]
   Host-only networking on /dev/vmnet1                     [  OK  ]
   DHCP server on /dev/vmnet8                              [  OK  ]
   NAT networking on /dev/vmnet8                           [  OK  ]
   Host-only networking on /dev/vmnet8                     [  OK  ]
   Virtual ethernet                                        [  OK  ]

Trying to find a suitable vmmon module for your running kernel.

None of VMware GSX Server's pre-built vmmon modules is suitable for your running
kernel.  Do you want this script to try to build the vmmon module for your 
system (you need to have a C compiler installed on your system)? [yes] 

What is the location of the directory of C header files that match your running 
kernel? [/lib/modules/2.4.18-19.7.x/build/include] 

Extracting the sources of the vmmon module.

Building the vmmon module.

make: Entering directory `/tmp/vmware-config0/vmmon-only'
make[1]: Entering directory `/tmp/vmware-config0/vmmon-only'
make[2]: Entering directory `/tmp/vmware-config0/vmmon-only/driver-2.4.18-19.7.x'
make[2]: Leaving directory `/tmp/vmware-config0/vmmon-only/driver-2.4.18-19.7.x'
make[2]: Entering directory `/tmp/vmware-config0/vmmon-only/driver-2.4.18-19.7.x'
make[2]: Leaving directory `/tmp/vmware-config0/vmmon-only/driver-2.4.18-19.7.x'
make[1]: Leaving directory `/tmp/vmware-config0/vmmon-only'
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.

Trying to find a suitable vmnet module for your running kernel.

None of VMware GSX Server's pre-built vmnet modules is suitable for your running
kernel.  Do you want this script to try to build the vmnet module for your 
system (you need to have a C compiler installed on your system)? [yes] 

Extracting the sources of the vmnet module.

Building the vmnet module.

make: Entering directory `/tmp/vmware-config0/vmnet-only'
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.

You have already setup networking.

Would you like to skip networking setup and keep your old settings as they are? 
(yes/no) [yes] no

Do you want networking for your Virtual Machines? (yes/no/help) [yes] 

Would you prefer to modify your existing networking configuration using the 
wizard or the editor? (wizard/editor/help) [wizard] editor

The following virtual networks have been defined:

. vmnet0 is bridged to eth0
. vmnet1 is a host-only network on subnet 10.10.10.0.
. vmnet8 is NAT network on a private subnet 0.0.0.0.

Do you wish to make any changes to the current virtual networks settings? 
(yes/no) [no] yes

Which virtual network do you wish to configure? (0-99) 0

The network vmnet0 has been reserved for a bridged network.  You may change it, 
but it is highly recommended that you use it as a bridged network.  Are you sure
you want to modify it? (yes/no) [no] yes

What type of virtual network do you wish to set vmnet0? 
(bridged,hostonly,nat,none) [bridged] none

Removing a bridged network for vmnet0.

The following virtual networks have been defined:

. vmnet1 is a host-only network on subnet 10.10.10.0.
. vmnet8 is NAT network on a private subnet 0.0.0.0.

Do you wish to make additional changes to the current virtual networks settings?
(yes/no) [no] yes

Which virtual network do you wish to configure? (0-99) 8

The network vmnet8 has been reserved for a NAT network.  You may change it, but 
it is highly recommended that you use it as a NAT network.  Are you sure you 
want to modify it? (yes/no) [no] yes

What type of virtual network do you wish to set vmnet8? 
(bridged,hostonly,nat,none) [nat] none

Removing a NAT network for vmnet8.

The following virtual networks have been defined:

. vmnet1 is a host-only network on subnet 10.10.10.0.

Do you wish to make additional changes to the current virtual networks settings?
(yes/no) [no] 

Please specify a port for remote console connections to use [902] 

Stopping xinetd:                                           [  OK  ]
Starting xinetd:                                           [  OK  ]
Configuring the VMware VmPerl Scripting API.

Building the VMware VmPerl Scripting API.

Installing the VMware VmPerl Scripting API.

The installation of the VMware VmPerl Scripting API succeeded.

Do you want to enter a serial number now? (yes/no/help) [no] no

Starting VMware services:
   Virtual machine monitor                                 [  OK  ]
   Virtual ethernet                                        [  OK  ]
   Host-only networking on /dev/vmnet1 (background)        [  OK  ]

The configuration of VMware GSX Server 2.0.1 build-2129 for Linux for this 
running kernel completed successfully.

Enjoy,

--the VMware team